Mauser Model 98 Rifle Stock Long Action w/ Sling M-98

Nice Sporter Mauser Action Wood Checkerd Stock No Reser

 245661705905169930 Mauser Model 98 Rifle Stock Long Action w/ Sling M 98

Mauser Model 98 Rifle Stock Long Action w/ Sling M-98 * click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge Description : Mauser Model 98, Post 64, Long Action, Wood Checkered Stock This Stock is used with no cracks or breaks, but, it has some minor war wounds. It is all original Sportier with sling and swivel. It does have a few dings and dents, but nothing major. The Checkering is deep, and still looks just fine. The Butt pad is marked Interarms. The Pistol grip end cap, is Bakelite, and is not cracked, but has some dings. The Foreend is checkered, with a Black ebony tip, as shown. The sling is 100% leather, and the swivels are the quick release, quick change, type. No floor-plate or trigger guard comes with this stock. Please look at the picture and judge what overall condition the stock is in. This action should fit the following calibers .25-06 , . .260 Remington , .264 Winchester Magnum , .270 Winchester , , 7mm-08 , 7mm Rem./Wby. Mag./STW , *7mm Rem. Ultra Mag. , .280 Remington/.284 Winchester , .30-06 Springfield , .300 H&H , , .300 Winchester Magnum , *.300 Remington SA Ultra Mag. , *.300 Remington Ultra Mag. , . .30-338 Winchester , *.30-378/.300 Dakota , 8mm Remington Magnum , , .338 Winchester , *.338 Remington Ultra Magnum , .340 Weatherby Magnum , , .35 Remington , .35 Winchester , .35 Whelen , .375 H&H Magnum , , .416 Remington Magnum , * , .45-70 Gov't , .458 Winchester Magnum and More, This is what the Internet says about the M-98 Mauser The Gewehr 98 (abbreviated G98 or Gew 98) is a German bolt action Mauser rifle firing the 8x57mm cartridge from a 5 round internal clip-loaded magazine that was the German service rifle from 1898 to 1935, when it was replaced by the Karabiner 98k. It was hence the main rifle of the German infantry during World War I. The Gewehr 98 replaced the earlier Gewehr 1888 rifle as the German service rifle. History German Empire, 1871–1918. The Gewehr 98, named for 1898, the first year of its manufacture, superseded the earlier Gewehr 1888 in German service. The bolt-action design used for the Gewehr 98 was patented by Paul Mauser on 9 September 1895. The Gewehr 98 itself was the latest in a line of Mauser rifles that were introduced in the 1890s. The German Gewehr-PrÜfungskommission (G.P.K.) (Rifle Testing Commission) adopted the Gewehr 98 on 5 April 1898. The action was derived from the experimental Gewehr 96 Rifle. In 1901, the first troop issues of the Gewehr 98 Rifles were made to the East Asian Expeditionary Force, the Navy and three premier Prussian army corps. The Gewehr 98 received its first combat use in the Boxer Rebellion (1898–1901). In 1904, contracts were placed with Waffenfabrik Mauser for 290,000 rifles and Deutsche Waffen und Munitionsfabriken (DWM) for 210,000 rifles. In 1905, the 8 mm M/88 8x57mm I cartridge which was introduced in 1888 and loaded with a 8.08 mm (.318 in) 14.6 g (226 gr) round nose bullet was replaced by the 8x57mm IS which was loaded with a new 8.20 mm (.323 in) 9.9 g (154 gr) spitzer bullet. The ammunition conversion was indicated by a small "S" stamped above the chamber and on the barrel at the back of the rear sight base. Since the new IS cartridge had a flatter trajectory the Lange Visier rear sight had to be changed with an "S" adapted Lange Visier. Design details The Gewehr 98 or model 98 (M98) rifle is a manually operated, magazine fed, controlled-feed bolt-action rifle, 1,250 mm (49 in) in length and 4.09 kg (9 lb) in weight. It has a 740 mm (29 in) long rifled barrel and carries 5 rounds of 8x57mm ammunition in an internal magazine. The Gewehr 98 has two sling swivels, open front sights, and a curved tangent-type rear sight, known as the Lange Visier. The controlled-feed bolt-action of the Gewehr 98 is a distinct feature and is regarded as one of the major bolt-action system designs. M 98 controlled-feed bolt-action system The controlled-feed Mauser M98 bolt-action system is a simple, strong, safe, and well-thought-out design that inspired other military and hunting/sporting rifle designs that became available during the 20th century. A drawback of the M98 system is that it can not be cheaply mass produced very easily. Some other bolt-action designs (e.g. the Lee Enfield) offer trained operators a slightly faster rate of fire. Features The M98 system[3] consists of a receiver that serves as the systems shroud and a bolt group of which the bolt body has three locking lugs, two large main lugs at the bolt head and a third safety lug at the rear of the bolt which serves as a backup in case the primary locking lugs failed. This third lug is a distinctive feature and was not present on previous Mauser bolt-action designs. The two main locking lugs display a locking surface of 56 mm², whilst the third safety lug normally plays no part in locking the action to avoid asymmetric and hence unbalanced bolt thrust forces.[4] The diameter of the receiver was also enlarged compared to previous Mauser receivers for additional strength and safety. The bolt handle is permanently attached to the bolt and on the Gewehr 98 is straight and protrudes out. Another distinctive feature of the M98 system is the controlled-feed mechanism, consisting of a large, non-rotating claw extractor that engages the cartridge case rim as soon as the round leaves the magazine and firmly holds the cartridge case until the round is ejected by the ejector, mounted inside the receiver. Combined with a slight bolt retraction at the last stage of the bolt opening cycle, caused by the cammed surface on the rear receiver bridge, this results in a positive cartridge case extraction. The M98 bolt-action will cycle correctly irrespective of the way the rifle is moved or positioned during the bolt cycling action or if the cartridge has been fired or not. Only if the bolt is not brought back far enough, sharply enough, in a controlled round feed bolt-action the cartridge case may not be cleanly ejected and a jam may result. The bolt houses the firing pin mechanism that gets cocked when the bolt is opened and the cocking piece protrudes visually and tactilely from the rear of the bolt to indicate the action is cocked. This bolt sleeve lock was not present on previous Mauser bolt-action designs and reduced firing pin travel and lock time. The action features two large gas relief holes and a gas shield on the bolt sleeve designed to protect the users head in case of a primer or cartridge rupture or detonation. When the action suffers a catastrophic failure these safety features deflect escaping gas and eventual debris away from the operator's face. The M 98 bolt group can be easily removed from the receiver simply by pulling out the bolt stop, located at the left wall of the receiver, and then by rotating and pulling the bolt out. The metal disc inlay in the rifle stock functions as a bolt disassembly tool. Safety A three-position safety attached at the rear of the bolt which operating lever can be flicked from right (safety on, bolt locked) to middle (safety on, bolt can be opened for reloading), to left (ready to fire) but only when the rifle is cocked, otherwise the safety will not move. The safety secures the firing pin. The safety can only be released by firing the rifle with the safety set in the ready to fire position or by closing the cocked bolt with a previously pulled trigger that must be kept pulled back during the closing operation. Disengaging the safety by closing the bolt is only possible with the safety set in the ready to fire position. The safety catch lever is quite large, making it easy to operate but posing a problem for mounting telescopic sights low above the receiver whilst retaining good operability of the safety catch leaver. Ammunition feeding The internal magazine of the M98 system consists of an integral box machined to match the cartridge for which the rifle was being chambered, with a detachable floorplate, that can hold up to 5 8x57mm rifle cartridges. The magazine can be loaded with single rounds by pushing the cartridges into the receiver top opening or via stripper clips. Each stripper clip can hold 5 rounds to fill the magazine and is inserted into clip guides machined into the rear receiver bridge. After loading the empty clip is ejected when the bolt is closed. The magazine can be unloaded by operating the bolt (the safety should for safety reasons be set to the middle position for this) or in case of mechanical problems by opening the magazine floorplate, which is flush with the stock, with the help of a 8x57mm cartridge tip. Modern civilian offspring of the M98 system Though the production of the M98 system for the German military ceased at the end of World War II in 1945, the production of new Mauser M 98 and Mauser M 98 Magnum rifles for civil users has been resumed in 1999 by Mauser Jagdwaffen GmbH[5] (Mauser Huntingweapons Ltd.), according to original drawings of 1936 and the respective Mauser patents. These rifles retail (2009) for approximately EUR 6,800 for the basic Mauser M 98 version, but the addition of (luxury) options can make these rifles much more expensive. Several other gun manufactures and custom gun builders also currently produce new M98 system clones or M98 inspired bolt-action hunting/sporting rifles. Trigger The rifle had a two-stage trigger with considerable take up before the trigger engages the sear. This feature aids in preventing premature firing during stressful (combat) situations. Sights Originally the Gewehr 98 sight line had an open post type front sight, and a curved tangent-type rear sight with a V-shaped rear notch, known as the Lange Visier. The rear sight was graduated for 1888 pattern M/88 7.92x57mm I cartridges from 300 m to 2000 m in 100 m increments. The M/88 7.9mm I cartridge was loaded with full metal jacket projectiles of the round-nosed type. The standard open iron sight aiming elements consisted of relatively coarse rugged aiming elements making the sightline suitable for rough handling and low light usage, but less suitable for aiming at small point targets. The sights were designed with distant area fire targets like charging horseman units in mind, so the standard iron sight line could be calibrated for very long ranges. Military doctrine in the late 19th and early 20th century considered firing at distant area targets, where an officer would call out the range and the soldiers shot in volley, normal. Later the Gewehr 98 sight line was modified for 1905 patter 8x57mm IS cartridges. The 7.9 mm S bullet was lighter, pointed, and 8.2 mm (.323 inches) in diameter instead of 8.08 mm (.318 inches) with an improved ballistic coefficient. The new IS cartridge had a flatter trajectory, and was therefore somewhat less critical of range estimation. With the introduction of the 8x57mm IS ammunition the rear sight graduation was changed accordingly and could be regulated from 400 m (440 yd) to 2,000 m (2,200 yd) in 100 m (110 yd) increments. Interestingly, while the modified sight line for 8x57mm IS cartridges was calibrated for a minimal zero distance of 400 m (440 yd) and can result in hitting high when using the open post front sight and V-shaped rear notch at close range, the pillars formed by the tracks of the rear sight allow closer targets to be quickly bracketed between the "goalposts", a sighting method that automatically compensates for the high point of aim using the normal sighting method. Stock The Gewehr 98 oil finished rifle stock features a semi-pistol grip. A top handguard was standard on all rifles and extended from the front of the rear sight base terminating just ahead of the bottom barrel band. A steel cross bolt was mounted to distribute the forces and hence the effects of recoil on the stock bedding, reducing the chance to split the stock. The stock featured a quick detachable sling swivel on the underside of the butt stock, a top swivel located underneath the bottom barrel band and a parade hook mounted on the underside of the top H-style barrel band. The prewar stocks were produced from walnut wood and were aged for an average of three years to allow the wood to stabilize. Beginning in 1917, walnut shortages necessitated the use of beech wood. The late war production beech stocks were less durable and heavier than the original walnut stocks. Accessories The rifle was issued with a leather carrying sling. During the duration of World War I, due to a shortage of leather, slings were produced out of canvas. The rifle was able to fire rifle grenades. Various attachable rifle grenade launcher models were designed during World War I. German Seitengewehr 98/05 bayonet used during WW1. The Gewehr 98 was designed to be used with a bayonet.[6] For this the rifle had a H-style top barrel-band with a 4.5 cm (1.8 in) long bayonet lug. The long bearing surface on the Gewehr 98 eliminated the addition of a muzzle ring. The advantage of this solution lies in the fact that muzzle rings can interfere with barrel oscillation which can significantly impede the accuracy of a rifle. The rifle was originally issued with the Seitengewehr 98 pattern bayonet. This epee style bayonet has a 500 mm (20 in) long quillback blade. By the end of 1905, this bayonet began to be replaced with the more robust and practical Seitengewehr 98/05, with a 370 mm (15 in) blade. It was called the "Butcher Blade" by the Allies due to its distinctive shape, and was initially intended for artillerymen and engineers as a chopping tool as well as a weapon. Towards the end of World War I, the 250 mm (10 in) blade Seitengewehr 84/98 was introduced as an economy measure and because the longer models were impractical in narrow trenches; this model became standard issue during the Weimar Republic and Third Reich. Serrated versions of the aforementioned patterns intended to be used as as tools were carried by German Pioniere (military combat engineers). Variants Sniper models In the spring of 1915, it was decided to fit 15,000 Gewehr 98 rifles, selected for being exceptionally accurate during factory tests, with telescopic sights for sniper use, though the Gewehr 98 was not designed for use with aiming optics. To mount a telescopic sight directly over the rifle, the bolt had to be replaced with a model with a turned-down bolt handle. In the stock, a recess had to be made to accommodate the turned-down bolt handle modification. The telescopic sights consisted of 2.5x and 3x models, made by manufactures like Görtz, Gérard, Oige, Zeiss, Hensoldt, Voigtländer and various civilian models from manufacturers like Bock, Busch and FÜss. Several different mountings produced by various manufacturers were used. Even with a turned-down bolt handle (unless it is low-profile as is common practice with modern hunting rifles), optics mounted low above the receiver will not leave enough space between the rifle and the telescopic sight body for unimpaired operation of the bolt or three-position safety catch lever. This ergonomic problem was solved by mounting the telescopic sight relatively high above the receiver. In reality, 18,421 Gewehr 98 rifles were converted and equipped with telescopic sights and issued to German snipers during World War I.[7] Karabiner 98a Karabiner 98a Not to be confused with the later Karabiner 98k, the Karabiner 98a (K98a) was a shorter version of the Gewehr 98 originally made for cavalry and support unit use. The original model Karabiner 98, with a shorter barrel than the G98, was produced from 1899–1908, but it was not successful. In 1908, the Karabiner Model 1898AZ was approved. The new features were a small diameter receiver ring, tapered rather than stepped barrel contour, an L-shaped stacking rod attached to the stock near the muzzle, a turned-down bolt handle and recess in the stock in the same fashion as sniper Gewehr 98s. The "A" stood for "with bayonet", the "Z" stood for stacking pyramid, meaning carbine Model 1898 with bayonet attachment point and stacking rod device. In 1923, the AZ was dropped for 'a' as Germany sought to distinguish the model from the newer models 'b' and 'k'.[8] During World War I, the Karabiner 98a was issued to cavalry, to mountain troops, and later to "established" assault units. It was liked because it was lighter and shorter than the Gewehr 98, and was thus better suited for use in trench assaults. Karabiner 98b Karabiner 98b The Karabiner 98b was not technically another "carbine" variant, but rather was a rifle designated as a carbine to comply with the terms of the Treaty of Versailles which only allowed Germany to produce carbines.[8] The Karabiner Model 1898b was introduced in 1923.[9] The 98B had a tangent rear sight as opposed to the original "Lange" ramp sight, a wider lower band with side sling attachment bar, a side butt attachment point for a sling, and a turned down bolt handle. It was otherwise merely a modified form of the Gewehr 98, from which The Karabiner 98k was derived. Combat service The Gewehr 98 saw service primarily in World War I, as well as various colonial actions in the preceding years. As with all contemporary bolt-action rifles, it was a powerful and accurate rifle with long range that was poorly suited for the close quarter fighting of trench warfare. The considerable length of the rifle and the minimum sight setting of 400 meters (far in excess of the typical range in trench battles) were particular handicaps. Its successor, the Karabiner 98k, would go on to be the standard rifle of the German infantry during World War II. Some Gewehr 98s also saw service in World War II, though many of these older rifles were converted to either 98b or 98k specifications. The Gewehr 98 after World War I Sporting and hunting Gewehr 98 based sporting rifle manufactured in 1936. This example is fitted with a double set trigger. The trigger might be factory or installed by a professional gunsmith. After the World War I, the Treaty of Versailles left Germany extremely constricted in terms of military power. Civilians were not allowed to have any use of standard military weapons or ammunition. Since the 8x57mm IS round was so stout and great for hunting, people did not want to give up on it, so a redesign of the cartridge was made for the civilian market and the 8x60mm S accommodate the new longer case. The also rare 8x64mm S cartridge offers a comparable rechambering option for Mauser Gewehr 98 and Karabiner 98k rifles sporting 8 mm S-bores. Due to its larger case capacity the 8x64mm S chambering offers better ballistic performance than the 8x60mm S. Some custom rifles were made using Mauser 98's and rechambering them for the 9x57mm Mauser. Since the purpose for these rifles was hunting and sporting, the bolt was professionally bent down, gradually the bent bolt became the standard and replaced the older straight bolt (though that was of course not always the case). The standard military sights were replaced by a 100 m sight, along with a flip-up on the rear sight for 200 m. The military stocks were replaced by newer ones that did not include the extra length of stock for the bayonet lug. Today these sporter rifles are extremely rare and the 8x60mm S, 8x64mm S and 9x57mm Mauser cartridges are nearly obsolete, as only few mainstream ammunition manufacturers along with some other smaller companies continue to produce them. When correct ammunition is used in a converted rifle, a 8x60mm S, 8x64mm S or 9x57mm Mauser modified Gewehr 98 can be an extremely potent and inexpensive long-range big-game rifle. Also, many Gewehr 98 rifles acquired as trophies by Allied forces during the war and brought to the US were converted to the 8mm-06 wildcat cartridge, a modification of the original 8x57mm IS chambering to 8x63mm S to accommodate the use of common and inexpensive surplus .30-06 Springfield cartridges, with their 7.62 mm (.30 caliber) bullets replaced by 8 mm (.323 caliber) bullets. Such conversions are indistinguishable from unmodified rifle without careful examination, and can be quite dangerous if fired with the shorter 8x57 mm ammunition, as the cartridge case will stretch to fit the elongated chamber and possibly rupture in the process, which causes a potentially highly dangerous high pressure propellant gas leakage. However, the Mauser M 98 action is designed specifically to direct gas away from the shooter in the event of a case rupture. Weimar Republic and Nazi Germany The Weimar Republic, the successor state to the German Empire, implemented a program designed to update their remaining supplies of Gewehr 98 rifles for the Reichswehr in the years following World War I. Rifles allowed into service with the early Weimar security forces were stamped with a "1920" marking on their receiver ring. Further updates to Weimar-era Gewehr 98's often included the replacement of the Lange Visier rear sight with a standard Karabiner 98k-style rear sight and sometimes a shortening of the barrel to Karabiner 98k length. Rifles that received these later modifications will often have both Weimar-era and Nazi markings, and "S/42" stamped on the rear sight base. Additionally, Hitler initially chose to outfit his elite Schutzstaffel (SS) bodyguard units with modified Gewehr 98 rifles. Those rifles obtained by the SS normally had their original markings fully or partially removed and replaced with stylized Totenkopf markings. Ottoman Empire Large numbers of Gewehr 98 rifles were also given to the Ottoman Empire both during and after the war, including the majority of 1916 Waffenfabrik Oberndorf production. Many of these rifles were converted to the "M38" standard by the Turkish Republic in the years before, during, and after World War II. Today these rifles are widely available in North America along with other Turkish Mausers. Careful observation is usually needed to tell an ex-Gewehr 98 apart from the myriad of other common M38-standard Mausers. Turkish Gewehr 98 rifles that were not converted can be easily identified by a crescent moon stamping on the top of the receiver. Spanish Civil War The rifle saw some usage in the Spanish Civil War, mostly in the hands of Franco's Nationalists and German volunteer legions. Most of these rifles were bought and exported to the United States as cheap sporting rifles in the 1960s by Interarmco. China After 1935, a shortened derivative, the Kunghsien Type 24 Chiang Kai-shek battle rifle, saw service with the Chinese National Revolutionary Army and saw extensive use from the Nationalist-Communist Civil War and the Second Sino-Japanese War to (in the hands of their communist opponents) the Korean war. Israel During the formation of the state of Israel in the aftermath of World War II, the Haganah acquired substantial numbers of Karabiner 98k rifles from any European sources they could find. Some of these rifles were converted Gewehr 98 rifles, which aside from the Imperial German markings are identical to all other Israeli Mausers. Like other Israeli Mausers, most of Users Belgium[10] Czechoslovakia[10] German Empire[11] Iran Iran Royal Army[citation needed] Weimar Republic[12] Nazi Germany[13][14][15] Ottoman Empire[16] Republic of China in the form of the Chiang Kai-shek rifle.[17] See also List of infantry weapons of World War I Enfauser Karabiner 98k German 1930s successor Shipping : You pay only actual shipping with No So-called handling fee. I will be more than happy to combine your shipping, on all of your wins, from El-Rancho-Costa-Plenty. I will be glad to combine shipping and I never charge a handling fee only actual shipping anyway you like. Payment : PayPal is all eBay allows its sellers to accept. inkfrog terapeak i000000

Share This
1419